Astragalus membranaceus ultrafine powder alleviates hyperuricemia by regulating the gut microbiome and reversing bile acid and adrenal hormone biosynthesis dysregulation

Ethnopharmacological relevanceMetabolic syndrome is closely related to the intestinal microbiota and disturbances in the host metabolome. Hyperuricemia (HUA), a manifestation of metabolic syndrome, can induce various cardiovascular diseases and gout, seriously affecting a patient’s quality of life. Astragalus membranaceus has a long history as a commonly used traditional Chinese medicine to treat kidney disease in China and East Asia.Materials and methodsWe compared the therapeutic effect of benzbromarone and two different doses Astragalus membranaceus ultrafine powder (AMUP) in rats with HUA. Ultra-performance liquid chromatography-mass spectrometer was used to analyze the AMUP metabolism in the plasma, urine, and feces. Further, 16S ribosome RNA sequencing and feces metabolomic were performed to capture the variation of the gut microbiota and metabolites changes before and after drug administration.ResultsAMUP had a notable impact on reducing blood uric acid levels while protecting the liver and kidney. Drug metabolism analysis demonstrated that effective constituent flavonoids are distributed in the blood, whereas saponins remain in the intestine. Gut microbiota analysis showed that low-dose AMUP ameliorated HUA-induced gut dysbiosis by reducing the abundance of harmful bacteria and increasing that of some beneficial bacteria with anti-inflammatory properties, such as Clostridia, Lachnospiraceae, and Muribaculaceae. In addition, HUA-induced changes in metabolite contents in bile acid and adrenal hormone biosynthesis pathways were restored after treatment with AMUP.ConclusionLow-dose AMUP exerts remarkable therapeutic effects on HUA by regulating the gut microbiome and mediating gut metabolism pathways associated with uric acid excretion.     

High-temperature transformations of Cu-rich hydrotalcites

CuM(II)Al ternary hydrotalcites (M(II) = Ni, Co and Mg) with a (Cu+M(II))/Al atomic ratio of 3.0 and Cu/M(II) atomic ratio of 5.0 were synthesized by coprecipitation under low supersaturation. Powder X-ray diffraction of the as-synthesized samples showed a pattern characteristic of hydrotalcite-like (HT-like) structure (JCPDS: 41-1428). Thermal analyses of these samples showed four stages of weight loss/heat change when recorded in nitrogen. Analysis of the evolved gases characterized the nature of these transformations. The thermoanalytical effects differed significantly especially for the high-temperature transformations, when the treatment was performed in oxygen. In situ powder X-ray diffraction of the samples was carried out to elucidate the phase evolution of these compounds. Surprisingly formation of CuO was noted at temperatures around 200°C well below the destruction of the layered network. The nature of the resulting phases varied with both the nature of the co-bivalent metal ion and the heating atmosphere. FT-IR spectroscopy confirmed the retention of carbonate ions at higher temperatures (above 700°C), although the concentration of carbonate anion (most likely unidentate) varied with the calcination temperature. The crystallinity of CuO increased significantly above 600°C, probably through dissociation of copper oxycarbonate. Significant differences in the thermal transformation temperatures (for the third and the fourth transformations) of these samples containing different co-bivalent metal ions were not observed. This suggests that an association of the co-bivalent metal ions and/or trivalent metal ion in this phase is unlikely. A plausible thermal evolution scheme of these hydrotalcites is proposed.     

X-Ray Powder Diffraction Studies of Polyhydrates of Cross-Linked Tetraisoamylammonium Polyacrylates

X-ray powder diffraction studies were performed of the polyhydrates, formed at positive temperature in swelled grains of carboxylic cation-exchange resins in the form of tetraisoamylammonium (cross-linked tetraisoamylammonium polyacrylates, differing in the degree of cross-linking: 1, 2 and 3%). It was shown that the polyhydrates exist as the crystalline phase under specific conditions, determined earlier by DTA technique. Diffraction patterns of the samples, recorded at the temperature +3 ± 1 °C, indicate that the polyhydrates crystallize in hexagonal symmetry, the unit cell parameters are close to a=12.25 Å, c=12.72 Å and do not depend significantly upon the degree of cross-linking. The suppositions were made concerning the size of hydrate crystallites, formed in the swelled grains of the studied resins.This revised version was published online in July 2005 with a corrected issue number.     

液相色谱-串联质谱法检测雄蜂蛹粉中50种抗生素残留

建立了液相色谱-串联质谱检测雄蜂蛹粉中50种抗生素残留（大环内酯类、喹诺酮类、磺胺类、四环素类、硝基咪唑类、林可霉素和氯霉素）的方法。样品经高氯酸溶液和醋酸铅溶液提取沉淀蛋白质，清液用磷酸氢二钾溶液调节pH值至8，经固相萃取净化后进行仪器分析。采用多反应监测正离子或负离子模式检测，可以一次完成对雄蜂蛹粉中50种目标化合物的定性和定量测定。50种抗生素的加标回收率为70.2%~118.3%，相对标准偏差（RSD）为1.8%~13.6%。该方法操作简便，灵敏度高，适用于雄蜂蛹粉中多种兽药残留的分析确证。     

Preparation of La0.75Sr0.25MnO3 Nano-Phase Powders and Films from Alkoxide Precursors

The first purely alkoxide-based sol-gel route to nano-phase powders and thin films of perovskite La_0.75Sr_0.25MnO₃ is described. The phase and microstructure evolution on heat treatment of free gel films to form the target nano-phase oxide were investigated by TGA, IR spectroscopy, powder XRD, SEM and TEM-EDS. The xerogel consisted of a hydrated oxo-carbonate, without remaining alkoxo groups or solvent. Heating at 5°C·min^–1 decomposed the carbonate groups and yielded the pure perovskite La_0.75Sr_0.25MnO₃ at 760°C. The cell dimensions were virtually unchanged from the first observation of perovskite at 680°C, to 1000°C, 4 h. The monoclinic cell of La_0.75Sr_0.25MnO₃ obtained at 1000°C, 4 h, had the dimensions a = 5.475(1), b = 5.504(2), c = 7.771(1) Å, = 90.50(2), fitting the literature data quite well. Crack-free, homogenous, 150 nm thick La_0.75Sr_0.25MnO₃ films were prepared by spin-coating Si/SiO₂/TiO₂/Pt and polycrystalline -Al₂O₃ substrates with a 0.6 M alkoxide solution, followed by heating at 5°C·min^–1 to 800°C, 30 min.     

Zinc-catalyzed Williamson ether synthesis in the absence of base

Zinc powder was found to be a highly efficient catalyst for the synthesis of aromatic ethers using microwave heating in the presence of N,N-dimethylformamide as well as under stirring in an oil-bath using tetrahydrofuran as solvent without any inorganic base. This method can be used for selective mono-, di- or tri-O-alkylations.     

Pharmaceutical performance of solid dispersions containing poly(ethylene) glycol 6000 and diazepam or temazepamInfluence of grinding

The effect of grinding on the physical properties and pharmaceutical performance of solid dispersions made of poly(ethylene) glycol 6000 (PEG6000) and temazepam or diazepam was studied using differential scanning calorimetry (DSC), X-ray powder diffraction and dissolution experiments. DSC-analysis of flash-cooled dispersions revealed that amorphous PEG present immediately after grinding crystallised upon aging mainly into the twice folded modification and to a small extent into the extended form. DSC-analysis of dispersions kept in the slab form for 1 month and subsequently ground, revealed that in the abscence of the grinding impulse crystallisation of PEG6000 takes place in the same way as in dispersions ground immediately after preparation and then aged for 1 month. Grinding solid dispersions immediately after preparation resulted in superior dissolution properties compared with solid dispersions kept in the monolith-slab form and subsequently ground. This difference in dissolution properties was found to be attributed to the drug and not to the polymer, more precisely, it was suggested that the drug particle size in ground dispersions was smaller than in dispersions kept in the slab form and subsequently ground. These findings suggest that grinding of solid dispersions immediately after preparation is the preparation method of choice instead of liquid filling of hard gelatin capsules resulting in monoliths. This revised version was published online in July 2006 with corrections to the Cover Date.     

Catalytic Active Site for NO Decomposition Elucidated by Surface Science and Real Catalyst

Comprehensive studies combining surface science and real catalyst were performed to get further insight into catalytic active site and reaction mechanism for NO decomposition over supported palladium and cobalt oxide-based catalysts. On palladium single-crystal model catalysts, adsorption, dissociation and desorption behavior of NO was found to be closely related to the surface structures, the stepped surface palladium being active for dissociation of NO. In accordance with this result, the activity of powder Pd/Al₂O₃ catalysts for NO decomposition was directly related to the number of step sites exposed on the surface, suggesting that the step sites act as the catalytic active site for NO decomposition on Pd/Al₂O₃. NO decomposition over cobalt oxide was found to be significantly promoted by addition of alkali metals. Surface science study and catalyst characterization led to the same conclusion that the interface between the alkali metal and Co₃O₄ serves as the catalytic active site. From the results of in situ Fourier transform infrared (FT-IR) spectroscopy and isotopic transient kinetic analysis, a reaction mechanism was proposed in which the reaction is initiated by NO adsorption onto alkali metals to form NO₂⁻ species and then NO₂⁻ species react with the adsorbed NO species to form N₂ over the interface between the alkali metal and Co₃O₄.     

催化剂和供氢剂对渣油模型化合物裂化反应选择性的影响

供氢剂与分散性催化剂协同作用对于传统的煤液化体系和渣油加氢裂化体系非常重要。通过活化分子氢及煤分子，使液化反应在较低的温度下进行以减少副反应，继而提高氢转移效率，增加液体产物产率。供氢剂和催化剂起促进煤分子裂化的作用。将供氢剂与催化剂的协同作用应用于渣油加     

聚合物 分散液晶体系的相分离结构对温度依赖性的研究

在不同温度下采用紫外光引发相分离法制备了聚合物分散液晶样品．用光学显微镜及扫描电镜研究了样品的相分离结构．采用对样品施加电压观察其微结构轮廓，或测量液晶微粒相变点的简单方法研究了聚合温度对相分离结果的影响．结果表明，在一定温度范围内，随着温度的增高，液晶微粒的平均尺寸趋于减小，而且形成的液晶微粒也逐渐变纯．作者给出了这些测试结果并进行了讨论．